|
|
Aidmer78-023 PTFE Film
Skived PTFE Films is made by plunger extrusion of suspension polymerized PTFE
resin. Among all the existing plastics, O Ring PTFE Gasket has the best corrosion-resistance and dielectricity.
Lead insulating film, corrosion-resistant Skived PTFE Thin Film, and corrosion-resistant
insulating Skived Teflon Thin Film for different corrosive conditions, heat exchanger.
Skived PTFE films exhibits good strength, abrasion resistance and low friction. It conforms well to irregular surfaces and offers higher elongation than our high modulus skived PTFE. These tapes are used widely on printing and duplicating machinery to help paper slide while remaining resistant to chemicals and inks.
| Project Name |
Unit |
Result |
| Apparent Density |
g/cm3 |
2.1 ~ 2.3 |
| Tensile Strength |
Mpa |
≥ 14.0 |
| Ultimate Elongation |
% |
≥ 150 |
| Thick ( mm ) |
0.03mm ~ 0.5mm |
| Length ( mm ) |
5m, 10m, 20m |
STOCK DIMENSION:
| Width ( mm ) |
1000mm |
500mm |
| Thick ( mm ) |
0.05( mm ) |
0.08( mm ) |
| Length ( mm ) |
10m/roll |
10m/roll |
|
【PTFE
Teflon】
